Home - Knowledge - Details

Daily maintenance management of screw conveyor

During the use of the screw conveyor, we must pay attention to daily maintenance, so as to maximize the cooperation with the sand dryer, ensure the production capacity and efficiency, and also extend the service life of the equipment.

(1) Lubricating oil should be regularly added to bearings, gears, chains and other transmission parts.

(2) After the box feeder is disabled, the spiral blades should be inspected for wear, and repair welding should be performed when the wear is severe.

(3) The conveying volume must not be overloaded, otherwise the material will not be discharged, causing the spiral shaft to bend and the box to swell.

(4) When the conveyed medium has a high degree of depression, it should be noted whether the expansion and contraction of the box is free and there is no stuck place, if there is a tight solution.

(5) When the conveyor is running and the noise is harsh, it should be covered and checked to eliminate the fault.


Send Inquiry

You Might Also Like