Material Leakage Factors Of Mixer
Leave a message
1.Reason: The sealing strip is not tightly sealed
Solution: Readjust or reinstall
2.Reason: The sealing strip is damaged
Treatment method: replace the sealing strip
3.Reason: Material accumulation on one side of the discharge door
Solution: Clean up the accumulated material
4.Reason: Insufficient cylinder pressure
Solution: Adjust pressure ≥0.63MPa
5.Reason: The connection body of the discharging door linkage mechanism is worn
Solution: Replace related wear parts
6.Reason: The position of the travel switch is wrong (electric)
Solution: Adjust the position of the travel switch
7.Reason: Displacement of the discharge door
Solution: Adjust and fix
8.Cause: Strut Shift
Solution: Adjust the position of the support rod and make the discharge door tightly closed









